ABB REF 54 Series Operator's Manual page 8

5(B B


8
)HHGHU 7HUPLQDO DQG 0DFKLQH 7HUPLQDO
Operator's Manual
The user can also adjust the contrast by setting the "Contrast" parameter in MAIN
MENU/Configuration/MIMIC [17].
Provided the user stores the selected contrast tuning value in the non-volatile
memory (refer to section "Saving parameters" on page 23), the contrast is
automatically adjusted according to the set value after power cycling of the terminal.
6HOHFWLQJ ODQJXDJH
MAIN MENU
MAIN MENU
Status
Protection
Control
Cond. monit.
Measurement
Communication
General func.
Tests
Information
Configuration
)LJ  6HOHFWLRQ RI ODQJXDJH
7R FKDQJH WKH GLVSOD\ ODQJXDJH
1. In the MIMIC view at user level, press [E] for 2 s and enter the password to
access the technical level
↑ ↓
2. Press [ ] or [ ] to select Configuration (last item) in the MAIN MENU
→
3. Press [ ] to move to the Configuration menu
4. The cursor is at the first menu item, Languages, so you can move to the
Language menu by pressing [
↓
5. Press [ ] to move the cursor to the desired language
6. Confirm the selection by pressing [E]
• After confirmation, the cursor automatically returns to the MAIN MENU
0DLQ ZLQGRZ
The main window informs the user via different views and menus, for example:
• At user level
• MIMIC configuration, CB status, disconnector status, etc.
• events
• measurements
• alarms
• At technical level
• parameter settings
GROUP MENU
PARAMETER MENU
Configuration
Languages
→
]
1MRS 750500-MUM
Confirm
Languages
English E
Cancel
C