Advertisement
Available languages
Available languages
Note:
•
Do not run the appliance excessively for more than 3 minutes at a time to
avoid overheating activation. In case of overheating, the appliance will stop
work automatically. Let it cool down sufficiently before restart.
•
With the safety microswitch, the appliance will turn off automatically once
the mixing cup is released from the microswitch plate.
•
Before removing cup, ensure to turn off appliance using On/Off switch and
let the motor come to a complete stop.
Cleaning, Care & Maintenance
•
Always disconnect from power supply before cleaning.
•
Always allow to cool before cleaning.
•
Let the motor come to a complete stop before removing the cup.
•
The cup is NOT dishwasher proof!
•
Use warm, soapy water and a damp cloth to clean the cup.
•
The agitators can be removed for thorough cleaning. Or, with the agitators in place, you can run the
appliance with clean water in the cup for seconds.
•
Dry thoroughly after cleaning.
•
A BUFFALO dealer or qualified technician should carry out repairs if required.
Warning: Do not allow any water to spill into the body of the appliance when
cleaning.
Troubleshooting
Fault
The unit is not
The unit is not switched on
working
Plug or lead is damaged
Fuse in the plug has blown
Power supply
Cup not located properly
Technical Specifications
Model
Voltage
CT938
220-240V~
50/60Hz
CY423
220-240V~
50/60Hz
CT938_CY423_ML_A5_v3_20210521.indb 5
CT938_CY423_ML_A5_v3_20210521.indb 5
Probable Cause
Power
Current
Capacity
80W
0.34A
80W+80W
0.34A
2 x 750ml
Solution
Check the unit is plugged in correctly and
switched on
Call BUFFALO agent or qualified Technician
Replace the plug fuse
Check power supply
Relocate cup
Cup
Dimensions
h x w x d mm
750ml
510 x 170 x 170
510 x 360 x 170
UK
Weight
3.45kg
7kg
5
2021/5/21 13:39
2021/5/21 13:39
Advertisement
