Troubleshooting - RIDGID SeeSnake micro Operator's Manual

SeeSnake micro

Troubleshooting

SYMPTOM
Display turns ON, but
does not show image.
LEDs on imager head
are dim at max bright-
ness, display switches
between black and
white, color display
turns itself OFF after a
brief period.
Unit will not turn ON.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX 781.665.0780 - TestEquipmentDepot.com
8
™ Inspection Camera
POSSIBLE REASON
Loose cable connections.
Imager head covered by debris.
Batteries low on power.
Dead batteries.
Ridge Tool Company
SOLUTION
Check cable connections, clean if re-
quired. Re-attach.
Visually inspect imager head to make
certain it is not covered by debris.
Replace batteries.
Replace batteries.