Advertisement
Available languages
Available languages
transmission on the "WEKA Service App". Once data transmission is completed please wait
until the green LED of the status and error report will start flashing again. The converter has
now booted up with the new firmware and is ready for use.
In case you did cancel the update or a data transmission error occurred or there is no update
available the converter will restart automatically after one minute and will boot up with the
current firmware again. The update process can be executed at any time again with the
instructions above.
8.
G U A R A N T E E
We will guarantee the WEKA chain saw for 12 months from the day of delivery. During this period we
will rectify material and production defects free of charge. This warranty does not cover normal wear
and tear, overloading, non-compliance with the operating instructions and intervention by
unauthorized persons or the use of parts from other companies.
9.
D E C L A R A T I O N O F C O N F O R M I T Y
Description:
Type:
from serial no.:
We hereby declare under our sole responsibility that this product conforms with the following
standards: EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3, EN62841-1, EN 60745-2-22:2011
in accordance to the regulations of directive: 2006/42/EG, 2011/65/EU and 2014/30/EU.
WEKA Elektrowerkzeuge
Auf der Höhe 20
D 75387 Neubulach
10.
R E C Y C L I N G
According to the European regulation 2002/96/EG we have to take back old machines for
departing them by substance and for recycling (see sign on name plate). Please make sure
that the old tool does not get into the unsorted municipal solid waste, but that they are given
back to us, resp. abroad to our distributors.
Diamond chain saw - for cutting in concrete, stone and masonry
TK40 (and versions)
0416001
Neubulach, 26.02.2019
Daniel Schrade, Owner
Original instructions - Subject to change without notice 0219
31
Advertisement
