Table of Contents
Advertisement
Available languages
Available languages
vacuum up rocks, broken glass, bottles, or
other similar objects.
■
Avoid situations that could cause fire in
the debris collector bag. Do not operate
the product near an open flame. Do not
vacuum up warm ash from fireplaces and
barbecue pits. Do not vacuum up discarded
cigars or cigarettes unless the cinders are
completely cool.
■
Keep all parts of your body away from
any moving part. Rotating fan blades
can cause severe injury. Stop the motor
and ensure that fan blades have stopped
rotating before opening the vacuum door,
installing or changing tubes, or opening or
removing debris bag.
■
When feeding material into the product,
make sure that the pieces of metal, rocks,
bottles, cans, or other foreign objects are
not included.
■
Do not allow processed material to build
up in the discharge zone. This may prevent
proper discharge and can result in kickback
of material through the intake opening.
■
If the product becomes clogged, stop the
product and disconnect the product from
the power supply before cleaning the
debris.
OVERLOAD PROTECTION
The product has an overload protection device
that is activated when overheating or when a
current spike occurs, automatically shutting
down power within the product. To resume
operation, disconnect the product from the
power supply, wait for about 15 minutes, and
reconnect the product to the power supply.
TRANSPORTATION AND STORAGE
■
Turn off the product, disconnect from the
power supply, and allow it to cool down
before storing or transporting.
■
Clean all foreign material from the product.
Store the product in a cool, dry, and
well-ventilated place that is inaccessible
to children. Keep the product away
from corrosive agents, such as garden
chemicals and de-icing salts. Do not store
the product outdoors.
■
For transportation in a vehicle, secure the
product against movement or falling to
prevent injury to persons or damage to the
product.
4
| English
MAINTENANCE
WARNING
Use
only
original
replacement
parts,
attachments. Failure to do so can cause
possible injury, can contribute to poor
performance, and may void your warranty.
WARNING
Servicing
requires
knowledge and should be performed only by
a qualifi ed service technician. For service ,
have the product serviced by an authorised
service centre only. When servicing, use
only original replacement parts.
■
Do not make adjustments and repairs not
described in this manual. For other repairs,
contact an authorised service agent.
■
After each use, clean the product with a
soft, dry cloth.
■
Check all nuts, bolts, and screws at
frequent intervals for proper tightness to
ensure that the product is in safe working
condition. Any part that is damaged should
be properly repaired or replaced by an
authorised service centre.
■
Bring the product to an authorised service
centre to replace damaged or unreadable
labels.
CLEARING A BLOCKAGE
■
To reduce the risk of injury associated with
contacting rotating parts, always stop the
product, disconnect from the power supply,
and make sure that all moving parts have
come to a complete stop.
■
Remove the blower tubes to inspect for
blockage. Clear the tubes if required.
■
Remove the debris collector bag. Check
that the bag adaptor is free from obstruction.
■
Inspect the opening to the fan enclosure
and the tube to the debris bag for evidence
of a blockage. Remember, even though the
product is disconnected from the power
supply, the fan or mulching blades may
move as you clear any blockage. Keep
fingers away from the fan or mulching
blades at all times.
manufacturer's
accessories
and
extreme
care
and
Advertisement
Table of Contents
