Advertisement
Quick Links
Advertisement
Related Manuals for Ryobi RBV254ON
Summary of Contents for Ryobi RBV254ON
- Page 1 ORIGINAL INSTRUCTIONS Blower/Vacuum RBV254ON...
- Page 2 Important! It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product. Subject to technical modification.
- Page 3 Fig. 1 Fig. 2...
- Page 4 Fig. 3 Fig. 6 Fig. 4 Fig. 5 Fig. 7...
- Page 5 STOP Fig. 10 Fig. 8 Fig. 11 Fig. 9 Fig. 12...
- Page 6 Fig. 13 Fig. 15 Fig. 16 Fig. 14...
- Page 7 Fig. 17...
- Page 8 Fig. 18...
- Page 9 Safety, performance, and dependability have been given ■ Operate the product only at reasonable hours – not top priority in the design of your petrol blower/vacuum. early in the morning or late at night when people might be disturbed. INTENDED USE ■...
- Page 10 ■ Do not smoke when mixing fuel or filling the fuel tank. on a hillside. ■ Mix and store fuel in a container approved for fuel. ■ To avoid serious injury to the operator or damage to the product, do not try to vacuum up rocks, broken glass, ■...
- Page 11 To obtain a replacement bag, see your plastics are susceptible to damage from various types local Ryobi dealer. Visit the Ryobi website for your nearest of commercial solvents and may be damaged by their location or call Ryobi customer service.
- Page 12 properly gapped and free of deposits in order to ensure 7. Vacuum tube screw proper engine operation. The correct gap is 0.025 in. 8. Leaf nozzle (0.64 mm). To widen gap, if necessary, carefully bend 9. Throttle lock the ground (top) electrode. To lessen gap, gently tap 10.
- Page 13 If any parts are damaged or missing, please call your 2. Unzip the vacuum bag and place the adaptor inside. Ryobi service centre for assistance. Push the vacuum bag adaptor through the opening opposite the zipper. The wider end of the adaptor will...
- Page 14 2-stroke oil. The mixture should be at starting the product. a 50:1 ratio. NOTE: We recommend you use Ryobi synthetic 2-stroke REMOVING THE VACUUM BAG lubricant. Only use a quality synthetic 2-stroke lubricant in 1. Remove the vacuum bag adaptor by lifting the locking the product to ensure top performance and engine longevity.
- Page 15 The starter will not start if the Only use the Ryobi OES18 electrical starter. Use of electrical starter is not properly engaged. any other starter may damage the engine and cause 7.
- Page 16 from step 5. Do not repeat the procedure more than WARNING 1 time. Watch out for children, pets, open windows, or freshly To stop the engine: washed cars, and blow debris safely away. Toggle the stop switch to the STOP position. The switch automatically returns to the “l”...
- Page 17 other similar objects. 8. If the vacuum tubes clog up, stop the engine and Mix the fuel mix thoroughly and also disconnect the spark plug wire before cleaning out each time before refuelling. the obstruction. Remove the vacuum tubes and clear the debris from the blower fan housing.
- Page 18 Sound pressure level at operator PRODUCT SPECIFICATIONS position according to EN 15503:2009+A1:2013 Annex A Petrol blower/vacuum (blower/vacuum) Model RBV254ON Blower Engine displacement 25.4 cc Idling 85.6 Rated power 0.80 kW Racing 101.8 Engine speed (max) 10 000/min Equivalent A-weight emission 101.1...
- Page 20 Techtronic Industries (Australia) Pty. Ltd. 31 Gilby Road, Mount Waverley, VIC 3149, Australia Techtronic Industries New Zealand Ltd. 2 Landing Drive, Mangere, Auckland, New Zealand 2022 961487009-02...