Environmental Protection; Symbols On The Product; Symbols In This Manual - Ryobi R18TB Original Instructions Manual

■ For greater safety and reliability, all repairs should be
performed by an authorised service centre.
LUBRICATION
All of the bearings in the product are lubricated with a
sufficient amount of high grade lubricant for the life span of
the product under normal operating conditions. Therefore,
no further lubrication is required.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing
of as waste. The machine, accessories, and
packaging should be sorted for environment-
friendly recycling.

SYMBOLS ON THE PRODUCT

Read and understand all instructions
before operating the product, follow all
warnings and safety instructions.
No-load speed
V Volts
Direct current
Revolutions or reciprocations per
min
-1
minute
Regulatory Compliance Mark (RCM).
Product meets applicable regulatory
requirements.
Wear ear protection.
Wear eye protection.
1
Wear a suitable dust protection mask
Do not expose to rain or damp
condition.
Beware of thrown or flying objects.
Keep all bystanders at least 15 m
away.
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authority or
retailer for recycling advice.

SYMBOLS IN THIS MANUAL

Note
The following signal words and meanings are intended to
explain the levels of risk associated with this product.
DANGER
Indicates an imminently hazardous situation, which, if
not avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not
avoided, may result in minor or moderate injury.
CAUTION
Without safety alert symbol
Indicates a situation that may result in property damage.
2
3
4
3