Application Configuration - Nokia 7368 ISAM CPE A-240Z-A Product Manual

Configure an A-240Z-A CPE
Field
ICMP, Telnet, SSH, HTTP,
TR-069, HTTPS
Source IP Start
Source IP End
(2 of 2)
2
3
4
5
6
7
8.2.5

Application configuration

A-240Z-A CPE also supports application configuration, including:
•
port forwarding
•
port triggering
•
DDNS
•
NTP
•
USB
•
UPnP and DLNA
•
voice setting
100
All manuals and user guides at all-guides.com
Description
Select an access control level for each protocol:
WAN side: Allow, Deny, or Trusted Network Only
LAN side: Allow or Deny
Enter a start IP address for the new subnet trusted network
Enter an end IP address for the new subnet trusted network
Select a WAN connection from the drop-down menu.
Click to enable or disable Trusted Network.
Select an access control level for each of the six protocols: ICMP, Telnet, SSH, HTTP,
TR-069, and HTTPS for both the WAN and the LAN side.
Click Save.
Optionally, add one or more subnet trusted networks.
The maximum number of entries is 32.
You can also use the Source IP fields to delete a previously created entry for a subnet trusted
network.
STOP. This procedure is complete.
3FE-46615-AAAA-TCZZA
7368 ISAM CPE A-240Z-A Product Guide
Issue: 01