Table of Contents
Advertisement
Level Radar LCR20
Certificates and Approvals
15
Certificates and Approvals
15.1
CE Mark
The measuring system meets the legal requirements of the applicable EU directives.
These are listed in the corresponding EU Declaration of Conformity along with the standards
applied.
Pepperl+Fuchs confirms successful testing of the device by affixing to it the CE mark.
15.2
RoHS
The measuring system complies with the substance restrictions of the Restriction on
Hazardous Substances Directive 2011/65/EU (RoHS 2).
15.3
RCM-Tick Marking
The supplied product or measuring system meets the ACMA (Australian Communications
and Media Authority) requirements for network integrity, interoperability, performance
characteristics as well as health and safety regulations. Here, especially the regulatory
arrangements for electromagnetic compatibility are met. The products are labeled
with the RCM-Tick marking on the name plate.
Figure 15.1
15.4
Approvals
•
Non-hazardous area
•
ATEX II 1G Ex ia IIC T4...T1 Ga
•
ATEX II 1/2G Ex ia IIC T4...T1 Ga/Gb
•
CSA C/US General Purpose
•
CSA C/US IS CI.I Div.1 Gr.A-D, AEx ia / Ex ia T4
•
CSA C/US Cl.I Div.2 Gr.A-D, T4
•
IEC Ex ia IIC T4...T1 Ga/Gb
Additional safety instructions must be followed for use in hazardous areas.
Please refer to the separate instruction manual (SI) document included in the delivery.
Reference to the applicable SI can be found on the nameplate.
39
Advertisement
Table of Contents
