Applied Instruments XR-3 Operation Manual page 23

XR-3 Base Instrument Operation Manual
8) For satellite module applications, select your desired Limit Values file: Dish Corp, Dish RSP,
or No Limits. See Limit Values section below for more details.
9) For satellite module applications, select your postal code region: USA ZipCodes, Canadian
Postal, or No Postal Code (if located outside of North America).
Click "UPDATE" to start updating the instrument. The progress bar at the bottom will show
the installation progress of each component. In the screenshot from the example shown
below, the program has detected that one component needs to be updated (it automatically
placed one check mark next to the item that needs updated). The blue status bar at the
bottom of the program will reset itself after each component is downloaded.
The download process can take up to approximately 5 minutes to complete, depending on
the number of components that need to be updated.
The word "REMOTE" should appear on the LCD screen of the XR-3 to indicate that the
instrument is being programmed and controlled remotely. Standby while the instrument is
updated. Do NOT press any buttons on the XR-3 meter while the update is in progress. Do
NOT bump or unplug the USB data transfer cable from the meter while the update is in
progress.
TESCOMUSA.COM
Page 23 of 29
XR-3
TesCom USA