Table of Contents
Advertisement
CAUTION
•
PRODUCT DAMAGE MAY RESULT.
Make certain that the power source conforms to the requirements of your equipment.
•
PRODUCT DAMAGE MAY RESULT.
Maximum continuous operating water temperature for standard model pumps must not exceed 104°F
(40°C).
PACKAGE CONTENTS
Description
Pump
Switch
SPECIFICATIONS
Item
Number
2701
PREPARATION
Before beginning installation of product, make sure all parts are present. Compare parts with package
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Installation Time: 2 hours
Tools Required for Assembly (not included): Adjustable wrench, hacksaw, flathead screwdriver,
Phillips screwdriver, tape measure, utility knife, pipe wrench.
Parts Required For Assembly (not included): Sewage pump basin minimum 18 in. w x 30 in. deep,
basin cover, basin gasket, 1-1/4 in. check valve, 1-1/4 in. union, gate valve or ball valve as required by
codes, 1-1/4 in. Schedule 40 PVC pipe, 2-step PVC glue system (primer and sealer), cable, or zip ties.
Quantity
1
1
MOTOR DATA CHART
HP
Phase
Volts
1
1
115
PERFORMANCE
HP
Ft. of Head Flow (GPM)
10
1
20
30
40
Locked Rotor
Max Amps
12
0
48
42
36
28
16
3
Amps
34
Shut Off
Discharge
Head (Ft.)
Size
47
1-1/4 in.
Advertisement
Table of Contents
