Siemens Servo Screen 390 Service Manual page 40

5. Troubleshooting
Malfunction
It is not possible to print out on the
connected printer.
Information message "Replace Servo
Screen 390 battery" remains in the
Message window although the battery has
been replaced.
It is not possible to set Time or Date in
Servo Screen when connected to a SV 300/
300A.
The Servo Screen 390 starts up, but does
not display any information (e.g. curves or
numerical values) from the SV 300/300A.
5
40
Action
• Check/replace the printer cable.
• Make sure that the printer itself is properly
configured.
• Make sure that the connected printer is
selected in the printer list in Servo Screen
390.
• Try to connect another printer.
• If none of the above, replace PC 1662/
PC 1835.
• Confirm the battery replacement using the
B C
ATTERY
• If not the above, replace PC 1662/PC 1835.
• Make sure that the communication cable
between Servo Screen and SV 300/300A
is connected to N82 on SV 300/300A.
• Reset the memory in SV 300/300A-PC
1587. See SV 300/300A – Service Manual
(printed 1996 or later).
Siemens-Elema AB
Servo Screen 390
icon in the Service Menu.
HANGE
E382 E394E 061 01 02 02