Siemens Servo Screen 390 Service Manual page 21

Servo Screen 390
6
4
5
E382 E394E 061 01 02 02
2
3 1
Siemens-Elema AB
3. Disassembly and assembly
Front panel filter
• Separate the display section from the
computer section as previously described.
• Pull off the control knob from the pulse
generator shaft.
• Remove the rubber sealing strips (1).
• Remove the screws (2) holding the
bars (3).
• Lift off the bars (3) and the copper
plates (4).
• Lift off the support plate (5) including the
display.
• Lift off the front panel filter (6).
Assembling the display
section
The procedure for assembling the display
section is the reverse of the disassembly
procedure described above.
3
21