Parts List; Basic Wiring - Parallax 27911 Manual

Parts List

3-Axis Gyroscope module
•
BASIC Stamp HomeWork Board, Propeller BOE, Propeller QuickStart, or Arduino Uno
•
microcontroller (with breadboard, as needed)
22 gauge solid conductor hookup wire
•

Basic Wiring

Power Requirements: 2.7 to 6.5 VDC
•
Communication Interface: I2C (up to 400 kHz) or SPI (10 MHz; 4 & 3 wire)
•
Dimensions: 0.85 X 0.80 in (2.16 X 2.03 cm)
•
Program KickStarts
The KickStart examples display raw data output for each of the three axes. Values are retrieved
from the module using the I2C interface.
Copyright © Parallax Inc. Page 2 of 12