Main Function - Nicols BIRDY 25 MB Manual

 DMX input: For DMX512 link, use 5-pin XLR plug cable to input DMX signal
DMX output: For DMX512 link, use 5-pin XLR plugs cable to link the next unit
Sensitivity: Adjust the sensitivity

3.2 Main Function

To select any of the given functions, press the MENU button up to when the required one is
showing on the display. Select the function by ENTER button and the display will blink. Use
DOWN and UP button to change the mode. Once the required mode has been selected,
press the ENTER button to setup or it will automatically return to the main functions without
any change after idling 8 seconds. To go back to the functions without any change press
the MENU button. The main functions are showing below:
21-