STAR LASER PROFESSIONAL LASER SINGLE LASER USER MANUAL Thank you for using our products. For the sake of safety and better operation of this product, please read this manual carefully before using and operating it.
This product is suitable for creating perfect laser programs and high-quality laser effects. Before any first use, unpack the set and make sure there was no damage during transport. Check for missing any part supplied with the laser: 1 x STAR LASER 1 x POWER CABLE 1 x USER MANUAL NOTES : Never look directly at the beam to avoid any visual problems.
FRONT PANEL Laser aperture Sound active microphone Sound active Indicated : Blue LED Power indicator : Red LED REAR PANEL Power Jack Cooling Fan Audio sensitivity knob DMX signal indicator : Green Dipswitch : Setting functions DMX or linking jack FUNCTIONS AND SETTINGS FUNCTIONS i.
Dipswitch #10 is used to set master or slave mode. Master modes have sound active and AUTO mode. Slave modes have DMX and Slave mode. The units automatically identify DMX or SLAVE mode by data received. Dipswitch #9 is used to set sound active or AUTO mode in master mode.
MODE MASTER / SLAVE This mode allows you to connect up to 32 units together without controller. Install the unit in a suitable and stable position. Choose a unit to function as master mode, set dipswitch to select AUTO or Sound active mode. The others must be set in slave mode.
Page 7
In DMX mode, the laser is not controlled by the DMX console, DMX signal indicator flashes. Make sure the console and the units have the same channel. If the direction of the beam is not correct, restart the machine. If the unit does not work properly, turn the unit off then back on. If the unit meets other operational problems, we recommend that you contact your dealer.