Pegasus Astro Dual Motor Focus Controller Manual page 12

Control Motor
From these buttons you will control the steps of the stepper motor or pulses from DC motor.
Set the "Step" to the value you want (bigger the step / pulse count, larger the
•
movement of the motor shaft)
You can also fast select the predefined values you specified in "Custom Rates"
Click once the "step number" button. This is how many steps the motor will move
•
forward (+ steps) or backwards (- steps).
Notice that "Position" indicator will change its value and will confirm your command
There are also two more buttons that will forward / reverse accelerate the motor. Keep
mouse down and the motor will start accelerating to the director you clicked.
Use these buttons only if you need to fast move in or out the focuser
In every motor movement, final position (when motor stops) is saved in controller's
memory. This will ensure next time you power on the controller, last saved position will be
retrieved from its memory.
12 Pegasus Astro – Copyright 2016