KitchenAid KES6403 Manual page 9

PRODUCT USAGE
USING HOT WATER FEATURE
The Steam Wand can also dispense hot water which is great for an americano, tea, hot
chocolate, etc. You can also use hot water to pre-heat cups.
1
1 2
Toggle the Mode Button to select Water.
Place a cup under the Steam Wand.
NOTE: You can pause the cycle by pressing
before the cycle complete.
PROGRAMING FUNCTION
The Espresso Machine is equipped with programing functionality. Any customized settings will
be saved even in the event power is lost to the machine.
PROGRAMING THE ESPRESSO AND HOT WATER AMOUNT
1
1 2
To change pre-programmed Espresso
Volume for 1 or 2: Toggle the Mode
Button to select Espresso. Select the dose
you desire to program (1 or 2). Press and
hold button until desired espresso
amount is reached in your cup.
While programing your selected dose, the
dose and the button lights will blink.
Lights will stop blinking when programing
is complete.
2
1 2
1 2
Press Dose Button to select the volume of
water 1 (~ 4 ounces) or 2 (~ 6 ounces).
Press button to start water cycle.
Water flows out from the Steam Wand.
button to stop the flow of water
2
1 2
To change pre-programmed Water
Volume for 1 or 2: Toggle the Mode
Button to select Water. Select the dose
you desire to program (1 or 2). Press
and hold button until desired water
amount is reached in your cup.
While programing your selected dose, the
dose and the button light will blink.
Lights will stop blinking when programing
is complete.
9