Replacing The Fuser Cleaner - Brother HL-3450CN Series User Manual

CHAPTER 5 MAINTENANCE

Replacing the Fuser Cleaner

!
Warning
The Fusing unit and the parts around it are HOT! Be sure to wait until
the Fusing Unit has cooled sufficiently before replacing the Fuser
Cleaner.
If you touch the HOT parts, you might get injured.
Press the Power button to turn the printer off and wait until it has cooled
1.
down sufficiently.
Open the Top Cover.
2.
Release the Fuser Cleaner Lock
3.
Levers on both sides as shown:
5-14
Fig. 5-7