Table of Contents
Advertisement
Available languages
Available languages
4. Emergency Operation for Wireless Remote-controller
en
9
When the remote controller cannot be used
When the batteries of the remote controller run out or the remote controller
malfunctions, the emergency operation can be done using the emergency
buttons on the grille.
A STANDBY lamp
B OPERATING lamp
C Emergency operation cooling switch
D Emergency operation heating switch
E Receiver
C
D
Starting operation
• To operate the cooling mode, press the
• To operate the heating mode, press the
• Lighting of the OPERATING lamp B means the start of operation.
Note:
B
Details of emergency mode are as shown below.
A
Details of EMERGENCY MODE are as shown below.
Operation mode
Set temperature
E
Fan speed
Airflow direction
Stopping operation
• To stop operation, press the
2 seconds.
button C for more than 2 seconds.
button D for more than 2 seconds.
COOL
HEAT
24 °C, 75 °F
24 °C, 75 °F
High
High
Horizontal (Step 1)
Downward (Step 5)
button C or the
button D for more than
Advertisement
Chapters
Table of Contents
