Download Print this page
IDEC GT3A Series Manual

IDEC GT3A Series Manual

Analog timers

Advertisement

Quick Links

Timers
Key features of the GT3A series include:
4 selectable operation modes on each model
External start, reset, and pause inputs
Panel mount or socket mount
Large variety of timing functions
Power and output status indicating LEDs
UL, c-UL Listed
File No. E55996
Specifi cations
Operation
Time Range
Rated Voltage
Contact Ratings
Minimum Applicable Load
Voltage Tolerance
Error
Setting Error
Reset Time
Insulation Resistance
Dielectric Strength
Power Consumption
(approximate)
Mechanical Life
Electrical LIfe
Weight (approximate)
Vibration Resistance
Shock Resistance
Operating Temperature
Operating Humidity
Storage Temperature
Housing Color
For information, call 800-221-0487
GT3A Series — Analog Timers
GT3A-1
125V AC/250V AC, 3A;
30V DC, 1A (resistive load)
Between power and output terminals: 2,000V AC, 1 minute
Between contacts of different poles: 2,000V AC, 1 minute
Between contacts of the same pole: 750V AC, 1 minute
Delayed SPDT +
Delayed SPDT
instantaneous SPDT
10.8VA
(200V AC, 60Hz)
(200V AC, 60Hz)
10,000,000 operations minimum
50,000 operations minimum (rated load)
63g
Switches Unlimited
USA: 800-262-IDEC
tech@switchesunlimited.com
GT3A-2
Multi-mode
0.1s to 180 hours
100 to 240V AC, 50/60Hz
12V DC
24V AC, 50/60Hz / 24V DC
5V, 10mA (reference value)
AF20 (100V AC): 85 to 264V AC
AD24: 20.4 to 26.4V AC/21.6 to 26.4V DC
D12: 10.8 to 13.2V DC
±0.2%, ±10 msec (repeat, voltage, temperature)
±10% maximum
60msec maximum
100MW minimum
Delayed DPDT
13.5VA
(200V AC, 60Hz)
12VDC/1W
12VDC/1.1W
24VDC/0.7W
24VDC/0.6W
24VAC/1.2VA
24VAC/1.3VA
73g
100m/sec
2
(approximate 10G)
Operating extremes: 100m/sec
2
(approximate 10G)
Damage limits: 500m/sec
2
(approximate 50G)
–10 to +50°C
45 to 85% RH
–30 to +80°C
Gray
Fax 718-672-6370
www.switchesunlimited.com
Canada: 888-317-IDEC
sales@switchesunlimited.com
GT3A Series
GT3A-3
GT3A-4,-5,-6
Multi-mode with inputs (11 pins)
125V AC/250V AC, 5A;
30V DC, 5A (resistive load)
Delayed DPDT
14.4VA
4.7VA (100V AC, 60Hz),
14.4VA (200V AC, 60Hz)
12VDC/0.8W
24VDC/0.6W
24VAC/1.3VA
5,000,000 operations minimum
100,000 operations minimum (rated load)
79g
80g
805

Advertisement

loading

Summary of Contents for IDEC GT3A Series

  • Page 1 Timers GT3A Series GT3A Series — Analog Timers Key features of the GT3A series include: • 4 selectable operation modes on each model • External start, reset, and pause inputs • Panel mount or socket mount • Large variety of timing functions •...
  • Page 2: Part Numbers

    GT3A Series Timers Part Numbers GT3A-1, -2, -3 Complete Part No. Mode Of Rated Voltage Code Time Range Output Contact Operation 8-Pin 11-Pin AF20: 100 to 240V AC (50/60Hz) Delayed SPDT GT3A-1AF20 GT3A-1EAF20 250V AC, 3A, GT3A-2AF20 GT3A-2EAF20 30V DC, 1A...
  • Page 3 Timers GT3A Series Timing Diagrams/Schematics GT3A-1 Timing Diagrams Delayed SPDT n o p 8-Pin 11-Pin Operation Mode Selection POWER POWER ON-Delay 1 Item Terminal Number Operation Set Time 2 - 7 (8p) Power MODE 2 - 10 (11p) 5 - 8 (8p)
  • Page 4 GT3A Series Timers GT3A-2 Timing Diagrams GT3A-3 Timing Diagrams Delayed SPDT + Instantaneous SPDT Delayed DPDT n o p n o p 8-Pin 11-Pin 8-Pin 11-Pin Operation Operation Mode Mode Selection Selection POWER POWER POWER POWER Item Terminal Number Operation...
  • Page 5 Timers GT3A Series GT3A-4 Timing Diagrams Delayed DPDT (A Type) (Contact Input) (Transistor Input) (B Type) Start Reset n o p n o p n o p Operation Reset Start Gate Mode Selection Reset Start Gate POWER POWER POWER Item...
  • Page 6 GT3A Series Timers GT3A-5 Timing Diagrams Delayed DPDT (A Type) (Contact Input) (Transistor Input) (B Type) Start Reset n o p n o p n o p Operation Reset Start Gate Mode Selection Reset Start Gate POWER POWER POWER Item...
  • Page 7 Timers GT3A Series GT3A-6 Timing Diagrams Delayed DPDT (A Type) (Contact Input) (Transistor Input) (B Type) Start Reset n o p n o p n o p Operation Reset Start Gate Mode Selection Reset Start Gate POWER POWER POWER Item...
  • Page 8 GT3A Series Timers Instructions: Setting GT3A Series Timers Timed OUT Indicator POWER Indicator (fl ashes during time-delay period) m Setting Knob j Operator Mode Selector l Time Range Selector A, B, C, D 1S, 10S, 10M, 10H k Dial Selector 0-1, 0-3, 0-6, 0-18 Step 1.
  • Page 9 Damage limits: 500N (approximate 50G) Operating Temperature –10 to +50°C Storage Temperature –30 to +80°C Operating Humidity 45 to 85% RH Weight (approximate) Housing Color Gray For information, call 800-221-0487 Switches Unlimited Fax 718-672-6370 www.switchesunlimited.com USA: 800-262-IDEC Canada: 888-317-IDEC tech@switchesunlimited.com sales@switchesunlimited.com...
  • Page 10: Part Number List

    3. A (11-pin) and B (11-pin) differ in the way inputs are wired. 4. For socket and accessory part numbers, see page 838. 5. For timing diagrams overview, see page 794. For information, call 800-221-0487 Switches Unlimited Fax 718-672-6370 www.switchesunlimited.com www.idec.com tech@switchesunlimited.com sales@switchesunlimited.com...
  • Page 11: Operation

    (NC) Instantaneous Instantaneous Contact Contact 1 - 3 1 - 3 (NO) (NO) Time Elapsed Indicator Indicator DOWN DOWN Digital Time Digital Time Display Display For information, call 800-221-0487 Switches Unlimited Fax 718-672-6370 www.switchesunlimited.com USA: 800-262-IDEC Canada: 888-317-IDEC tech@switchesunlimited.com sales@switchesunlimited.com...
  • Page 12 (NO) (NO) 1 - 3, 9 - 11 (11p) 1 - 3, 9 - 11 (11p) Indicator Indicator Time Elapsed DOWN DOWN Digital Time Digital Time Display Display For information, call 800-221-0487 Switches Unlimited Fax 718-672-6370 www.switchesunlimited.com www.idec.com tech@switchesunlimited.com sales@switchesunlimited.com...
  • Page 13 9 - 11 9 - 11 9 - 11 Indicator Indicator Time Elapsed DOWN DOWN Digital Time Digital Time Display Display Set Time Set Time For information, call 800-221-0487 Switches Unlimited Fax 718-672-6370 www.switchesunlimited.com USA: 800-262-IDEC Canada: 888-317-IDEC tech@switchesunlimited.com sales@switchesunlimited.com...
  • Page 14 9 - 11 9 - 11 9 - 11 Time Elapsed Indicator OUT Indicator OUT DOWN DOWN Digital Digital Time Time Display Display Set Time Set Time T’ T’ For information, call 800-221-0487 Switches Unlimited Fax 718-672-6370 www.switchesunlimited.com www.idec.com tech@switchesunlimited.com sales@switchesunlimited.com...
  • Page 15 9 - 11 9 - 11 Time Elapsed Indicator OUT Indicator OUT DOWN DOWN Digital Digital Time Time Display Display Set Time Set Time T’ T” For information, call 800-221-0487 Switches Unlimited Fax 718-672-6370 www.switchesunlimited.com USA: 800-262-IDEC Canada: 888-317-IDEC tech@switchesunlimited.com sales@switchesunlimited.com...
  • Page 16 9 - 11 9 - 11 9 - 11 Time Elapsed Indicator OUT Indicator OUT Digital Digital DOWN DOWN Time Time Display Display Set Time Set Time T’ T” T” For information, call 800-221-0487 Switches Unlimited Fax 718-672-6370 www.switchesunlimited.com www.idec.com tech@switchesunlimited.com sales@switchesunlimited.com...
  • Page 17 9 - 11 9 - 11 Time Elapsed Indicator OUT Indicator OUT DOWN DOWN Digital Digital Time Time Display Display Set Time Set Time T’ T” For information, call 800-221-0487 Switches Unlimited Fax 718-672-6370 www.switchesunlimited.com USA: 800-262-IDEC Canada: 888-317-IDEC tech@switchesunlimited.com sales@switchesunlimited.com...
  • Page 18 Ta = Shorter than set time Tb = Shorter than single-shot output time T = T' + T" T0 = Single-shot output time (selected from A, B, C, D, E or F) For information, call 800-221-0487 Switches Unlimited Fax 718-672-6370 www.switchesunlimited.com www.idec.com tech@switchesunlimited.com sales@switchesunlimited.com...
  • Page 19 It is important to remember that the l Time Range Selector not only selects the time range but also infl uences the interpretation of the Digital Time Display. Changing the l Time Range Selector setting changes the units of time measurement (seconds, minutes, hours) as well as the decimal point location. For information, call 800-221-0487 Switches Unlimited Fax 718-672-6370 www.switchesunlimited.com USA: 800-262-IDEC Canada: 888-317-IDEC tech@switchesunlimited.com sales@switchesunlimited.com...
  • Page 20 It is important to remember that the l Time Range Selector not only selects the time range but also infl uences the interpretation of the Digital Time Display. Changing the l Time Range Selector setting changes the units of time measurement (seconds, minutes, hours) as well as the decimal point location. For information, call 800-221-0487 Switches Unlimited Fax 718-672-6370 www.switchesunlimited.com www.idec.com tech@switchesunlimited.com sales@switchesunlimited.com...
  • Page 21 It is important to remember that the l Time Range Selector not only selects the time range but also infl uences the interpretation of the Digital Time Display. Changing the l Time Range Selector setting changes the units of time measurement (seconds, minutes, hours) as well as the decimal point location. For information, call 800-221-0487 Switches Unlimited Fax 718-672-6370 www.switchesunlimited.com USA: 800-262-IDEC Canada: 888-317-IDEC tech@switchesunlimited.com sales@switchesunlimited.com...
  • Page 22 2. GT3F does not read the preset time range shown on the knob after power is turned off. Note that minimizing the preset time, by turning the knob to zero, does not shorten the delay time after power is removed. For information, call 800-221-0487 Switches Unlimited Fax 718-672-6370 www.switchesunlimited.com www.idec.com tech@switchesunlimited.com sales@switchesunlimited.com...
  • Page 23 Tr = Minimum Power Application Time begins. When time has elapsed, the NO contact opens. GT3F-1: 1 Second 4. For the timing diagram overview, see page 794. For information, call 800-221-0487 Switches Unlimited Fax 718-672-6370 www.switchesunlimited.com USA: 800-262-IDEC Canada: 888-317-IDEC tech@switchesunlimited.com sales@switchesunlimited.com...
  • Page 24 6 - 7 (11p) ON or L Input 1 - 4 (NC) 8 - 11 Delayed Contact 1 - 3 (NO) 9 - 11 Indicator POWER Set Time For information, call 800-221-0487 Switches Unlimited Fax 718-672-6370 www.switchesunlimited.com www.idec.com tech@switchesunlimited.com sales@switchesunlimited.com...
  • Page 25 2. When the Setting Knob l is set at 5.0, with Dial Selector j 0 to 60 and Time Range Selector k 10S selected, then the set time is 500 seconds. For information, call 800-221-0487 Switches Unlimited Fax 718-672-6370 www.switchesunlimited.com USA: 800-262-IDEC Canada: 888-317-IDEC tech@switchesunlimited.com sales@switchesunlimited.com...
  • Page 26 RC fi lter or bleeder resistor between power terminals so that the voltage between power terminals can be reduced to less than 15% of the rated voltage. For information, call 800-221-0487 Switches Unlimited Fax 718-672-6370 www.switchesunlimited.com www.idec.com tech@switchesunlimited.com sales@switchesunlimited.com...
  • Page 27: Time Ranges

    1 sec - 100 sec 0.5 sec Contact Ratings Contact Ratings 250V AC/30V DC, 5A (resistive load) Mechanical 20,000,000 operations minimum Life Electrical 100,000 operations minimum (rated load) For information, call 800-221-0487 Switches Unlimited Fax 718-672-6370 www.switchesunlimited.com USA: 800-262-IDEC Canada: 888-317-IDEC tech@switchesunlimited.com sales@switchesunlimited.com...
  • Page 28 Damage limits: 500m/sec (Approx. 50G) Type 2.3VA (100V AC, 60Hz), Power GT3S-1 4.0VA (200V AC, 60Hz) Consumption Type 2.3VA (100V AC, 60Hz), (Approx.) GT3S-2 3.8VA (200V AC, 60Hz) For information, call 800-221-0487 Switches Unlimited Fax 718-672-6370 www.switchesunlimited.com www.idec.com tech@switchesunlimited.com sales@switchesunlimited.com...
  • Page 29: Product Series

    The instantaneous contact goes on when power is turned on and goes off when power is turned off. = Star ON time (Set Time), T = Star-delta switching time, T = Delta ON time For information, call 800-221-0487 Switches Unlimited Fax 718-672-6370 www.switchesunlimited.com USA: 800-262-IDEC Canada: 888-317-IDEC tech@switchesunlimited.com sales@switchesunlimited.com...
  • Page 30 AD24 (AC/DC) 1.8VA/0.9W Mounting Position Free Dimensions 40Hx 36W x 70 mm Weight (Approx.) * For the value of the error against a preset time, whichever the largest applies. www.idec.com For information, call 800-221-0487 Switches Unlimited Fax 718-672-6370 www.switchesunlimited.com tech@switchesunlimited.com sales@switchesunlimited.com...
  • Page 31 6 sec - 6 min 0 - 30 36min - 30 hours 1 min - 60 min 6 hours - 300 hours 6 min - 6 hours For information, call 800-221-0487 Switches Unlimited Fax 718-672-6370 www.switchesunlimited.com USA: 800-262-IDEC Canada: 888-317-IDEC tech@switchesunlimited.com sales@switchesunlimited.com...
  • Page 32 Delayed (NC) (NC) OFF during T1 ON after T1, Contact Contact ON during T2 during T2 (NO) (NO) OUT1 OUT1 Indicator Indicator OUT2 OUT2 Set Time Set Time For information, call 800-221-0487 Switches Unlimited Fax 718-672-6370 www.switchesunlimited.com www.idec.com tech@switchesunlimited.com sales@switchesunlimited.com...
  • Page 33: Safety Precautions

    Make sure that the operating conditions are as described in the specifi ca- the Electronic Timer is used in places where it will be subjected to high-tem- tions. If you are uncertain about the specifi cations, contact IDEC in advance. perature, high-humidity, condensation, corrosive gases, excessive vibrations, or excessive shocks, then electrical shocks, fi...
  • Page 34 Insert 8-pin Socket SR2P-51 Socket SR2P-05 Hold-down Spring (sold separately) SFA-203 (use two springs) Socket SR2P-06 Hold-down Spring (sold separately) SFA-202 (use two springs) For information, call 800-221-0487 Switches Unlimited Fax 718-672-6370 www.switchesunlimited.com www.idec.com tech@switchesunlimited.com sales@switchesunlimited.com...
  • Page 35 8-pin solder terminal All 8-pin timers SR6P-S08 11-pin solder terminal All 11-pin timers SR6P-S11 No hold down springs are available for fl ush panel mounting. For information, call 800-221-0487 Switches Unlimited Fax 718-672-6370 www.switchesunlimited.com USA: 800-262-IDEC Canada: 888-317-IDEC tech@switchesunlimited.com sales@switchesunlimited.com...
  • Page 36 Input signal lines must be made as short as possible and installed away from power cables and power lines. Use shielded wires or a separate conduit for input wiring. For information, call 800-221-0487 Switches Unlimited Fax 718-672-6370 www.switchesunlimited.com www.idec.com tech@switchesunlimited.com sales@switchesunlimited.com...
  • Page 37 24V DC, 1mA maximum The time-delay operation is suspended while the gate input Gate Input Input response time: 50msec maximum is on (pause). For information, call 800-221-0487 Switches Unlimited Fax 718-672-6370 www.switchesunlimited.com USA: 800-262-IDEC Canada: 888-317-IDEC tech@switchesunlimited.com sales@switchesunlimited.com...
  • Page 38 Timers Dimensions 36.0 70.0 Unit: mm NOTE: GT3W series are UL Listed when used in combination with following IDECʼs sockets: GT3W-A11, A33: SR2P-06* pin type socket. GT3W-A11E: SR3P-05* pin type socket. (*-May be followed by A,B,C or U) The socket to be used with these timers are rated: -Conductor Temperature Rating 60ºC min.
  • Page 39 9.8 × 3 80.5 Analog and Digital GT3 Timer, 11-Pin with SR6P-M11G 11-M3.5 Teminal Screws 16.7 5.8 min. 3.5 max. ø3.6 min. 6.9 max. 9 10 30.5 For information, call 800-221-0487 Switches Unlimited Fax 718-672-6370 www.switchesunlimited.com USA: 800-262-IDEC Canada: 888-317-IDEC tech@switchesunlimited.com sales@switchesunlimited.com...
  • Page 40: General Instructions

    Tt: Average of measured values at °C T20: Average of measured values at 20°C = ± Average of Measured Values - Set Value x 100% Setting Error Maximum Scale Value For information, call 800-221-0487 Switches Unlimited Fax 718-672-6370 www.switchesunlimited.com www.idec.com tech@switchesunlimited.com sales@switchesunlimited.com...

This manual is also suitable for:

Gt3a-1Gt3a-2Gt3a-3Gt3a-4Gt3a-5Gt3a-6