Islander MR3 Series Maintenance Instructions

REQUIRED TOOLS REQUIRED TOOLS
Large flat bladed screwdriver
(a North American dime can be substituted)
Synthetic light oil and grease
(we recommend Synco Superlube™ Oil and Grease with Teflon®)
Powdered Graphite
(Often used to lubricate door locks.)
Lint-free cloth or paper towel.
Isopropyl Alcohol
(70% concentration at least)
A small, soft, scrubbing brush.
(Soft toothbrushes work well.)
Q-Tips®
FFor parts and service
call toll free: 1-888-404-1119
www.mikesreelrepair.comww.mikesreelrepair.com
M I
AINTENANCE
Thank you for purchasing an Islander MR3 model mooching reel.
In this manual you will find tips and instructions on how to keep your
new reel functioning like new for years to come. Concise illustrations
will help you clean and lubricate each important component.
FEATURES
Large arbor, ultra-light spool with ventilated arbor. The large
arbor allows for two to three times the retrieval rate of a standard
arbor.
7/16"
A huge 2 drag surface using Islander's proven Graphite
impregnated cork material. This, coupled with a dual phosphor
bronze pawl, translates incredible stopping power.
Converts from right to left-hand retrieve in seconds
Large, contoured palming rim and handles.
Buttery smooth sealed stainless steel bearings.
Large sculptured drag knob
SPECIFICATIONS
Spool Spool Spool
Diameter Width Volume Weight
(ounces)
(inches) (inches) (inches³)
4.6 0.9 6.7 12.8
NSTRUCTIONS
Islander MR3 Series
Capacity
350 yards of
30 lbs mono