Use; Inspection Before Each Use; Connections To Trolley; Connection Requirements - Harken ACCESS RAIL INCAR1-CURVE Instruction Manual

USE

USE

Inspection before each use

Always perform inspection before using the trolley. See pargraph " Preliminary and periodical checks"

Connections to trolley

• The R27 INCAR trolley is used
for fall arrest.
• Moreover R27 INCAR trolley is also designed
for use as a mobile anchor point for restraint.
The R27 INCAR1-CURVE trolley can be used for human suspension using 2 trolley (one is the working trolley
and the other is the fall-arrest trolley).

Connection requirements:

When using a hook with positive locking mechanism to connect to trolley shackle, ensure roll-out cannot
occur. Roll-out occurs when interference between hook and mating connector causes hook gate to uninten-
tionally open and release.
Use self-locking snap hooks and carabiners to reduce possibility of roll-out. Hooks or connectors must com-
pletely close over attachment object.
Do not attach a connector that will impact the side of the trolley when in use.

Loading trolley on rail:

Carefully align trolley with rail and gently roll into place.
34 ENGLISH 26/02/21