Roland VW-S1 User Manual

User's Manual
To Ensure Safe Use
For the USA
FEDERAL COMMUNICATIONS COMMISSION RADIO
FREQUENCY INTERFERENCE STATEMENT
Responsible Party: Roland DGA Corporation
Address: 15363 Barranca Parkway Irvine, CA 92618 U.S.A.
Telephone: 949-727-2100
Type of Equipment: Density Checker
Model Name: VW-S1
NOTE:
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Use only I/O cables that have been designed and manufactured specifically for this
device.
For EU Countries
Manufacturer:
ROLAND DG CORPORATION
1-6-4 Shinmiyakoda, Kita-ku, Hamamatsu-shi, Shizuoka-ken, 431-2103 JAPAN
The importer in the EU:
Roland DG Europe Holdings B.V.
Prof. J.H. Bavincklaan 2, 1183 AT, Amstelveen, The Netherlands
For EU Countries
WARNING
Operation of this equipment in a residential environment could cause radio interference.
For Canada
CAN ICES-3 (A)/NMB-3(A)
For California
WARNING
:
This product can expose you to chemicals including lead, which is known to the State
of California to cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
http://www.rolanddg.com/
Company names and product names are trademarks or registered trademarks of their respective holders.
Copyright ©2020 Roland DG Corporation
Thank you very much for purchasing this product. To ensure safe usage, be sure to read this user's manual before you use the product.
For China
产品中有毒有害物质或元素的名称及含量
部件名称
铅(Pb)
印刷电路板 ×
壳体 ○
其他 （电缆、 附件等） ×
○：表示该有毒有害物质在该部件所有均质材料中的含量均在 GB/T26572-2011 标准规定的限量要求以下。
×：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 GB/T26572-2011 标准规定的限量要求。
环保使用期限
此标志适用于在中国国内销售的电子信息产品，表示环保使用期限的年数。
所谓环保使用期限是指在自制造日起的规定期限内，产品中所含的有害物质
不致引起环境污染，不会对人身、财产造成严重的不良影响。
环保使用期限仅在遵照产品使用说明书，正确使用产品的条件下才有效。
不当的使用，将会导致有害物质泄漏的危险。
For EU Countries
This product must be disposed of
separately at your local waste recycling
center. Do not dispose of in household
waste bin.
Bitte führen Sie dieses Produkt separat
Ihrer örtlichen Entsorgungsstelle zu.
Bitte nicht mit dem normalen Hausmüll
entsorgen.
Ne jetez pas le produit avec vos
ordures ménagères. Portez-le dans un
centre recyclage des déchets.
Questo prodotto deve essere smaltito
negli appositi contenitori per la raccolta
differenziata, non buttare nel cestino
dei rifiuti casalinghi.
Este producto debe devolverse al
centro de reciclaje más cercano a su
domicilio para su correcta eliminación.
No lo tire a la basura.
Deite fora separadamente este produto
no seu centro de reciclagem local. Não
o deite fora no seu caixote do lixo.
Incorrect operation may cause injury
Never attempt to disassemble, repair, or modify the machine.
Doing so may result in fire, electrical shock, or injury. Entrust repairs to a
trained service technician.
Be sure to follow the operation procedures described in the user's
manual. Never allow anyone unfamiliar with the usage or handling of
the machine to touch it.
Incorrect usage or handling may lead to an accident.
This product is using GNU General Public License (GPL) / GNU Lesser General
Public License (LGPL) software. You can obtain the GPL/LGPL source code used
in this product by downloading it from the Roland DG Corporation website. See
the following URL for details on the basic method for acquiring the source code.
URL: https://www2.rolanddg.com/gpl/
Included Items
VW-S1
R1-200716
有毒有害物质或元素
六价铬 多溴联苯 多溴二苯醚
汞(Hg) 镉(Cd)
(Cr(Ⅵ)) (PBB) (PBDE)
○ ○ ○ ○ ○
○ ○ ○ ○ ○
○ ○ ○ ○ ○
Lever dit product in bij een lokaal
afvalverzamelpunt. NIET met normaal
huishoudelijk afval afvoeren.
Dette Produkt skal smides særskilt
væk på den lokale affalds- og
genbrugsstation. Må ikke smides ud
sammen med almindeligt
husholdningsaffald.
Tätä tuotetta ei saa hävittää
normaalien talousjätteiden mukana,
vaan se on toimitettava
ongelmajätteiden keräilypisteeseen
hävitettäväksi.
Produkten måste kasseras separat på
din lokala återvinningscentral. Släng
inte produkten tillsammans med
hushållssoporna.
Μην πετάξετε το αντικείμενο αυτό στο
καλάθι των απορριμμάτων. Αφαιρέστε
τις μπαταρίες και προσκομίστε το στο
τοπικό κέντρο ανακύκλωσης.
WARNING
USB cable
Installing the Driver
Install the driver on the same computer on which VersaWorks 6 is
installed. You can download the driver from the following URL.
http://download.rolanddg.jp/en/color.html#VW-S1driver
Specifications
VW-S1
25 (W) × 100 (H) × 25 (D) mm
Outer dimensions
(0.98 (W) × 3.94 (H) × 0.98 (D) in.)
USB (compliant with Universal Serial Bus Specification
Connectivity
Revision 2.0)
Power supply USB bus power
Use condition VersaWorks version 6.8.0 or later is installed.
Usage Method
Use the printer color match function of VersaWorks 6 to measure the
output color of the reference printer and target printer.
M E M O
For the settings and usage of VersaWorks 6, refer to the VersaWorks 6
user's manual.
Connect the included USB cable to the computer and the
A
VW-S1.
Start VersaWorks 6, and then set the VW-S1 to the
B
measurement instrument to use.
Display the [Printer Color Match Settings] window in
C
VersaWorks 6.
Measure the color chart of the reference printer.
D
Follow the on-screen instructions to apply the VW-S1 to
1
the printed color chart.
Press the switch to measure a color.
2
When you hear a beep, measurement is finished.
If a reading error occurs, the VW-S1 display window lights in red.
Repeat steps and to measure all the colors of the
3
1 2
color chart.
0 10 20 30 40 50 60 70 80 90 100
C
M
Y
K
Measure the color chart of the target printer in the same
E
D
manner as step .