Bunn FMD DBC-3 Operating & Service Manual page 3

USER NOTICES (cont.)
! WARNING
Fill water tank before turning - on -
thermostat or connecting appliance
to power source.
Use only on a properly protected
circuit capable of the rated load.
Electrically ground the chassis.
Follow national/local electrical codes.
Do not use near combustibles.
FAILURE TO COMPLY RISKS EQUIPMENT
DAMAGE, FIRE, OR SHOCK HAZARD
READ THE ENTIRE OPERATING MANUAL
BEFORE BUYING OR USING THIS PRODUCT
THIS APPLIANCE IS HEATED WHENEVER
CONNECTED TO A POWER SOURCE
00831.0000F 3/98 ©1998 BUNN-O-MATIC CORPORATION
00831.0000
CONTROL THERMOSTAT ADJUSTMENT
200 F
APPROXIMATE THERMOSTAT TEMPERATURE SETTINGS
28368.0001A 8/98 © 1998 BUNN-O-MATIC CORPORATION
This equipment must be installed to comply with the
Basic Plumbing Code of the Building Officials and
Code Administrators International, Inc. (BOCA) and
the Food Service Sanitation Manual of the Food and
Drug Administration (FDA). For models installed
outside the U.S.A., comply with the applicable
Plumbing /SanitationCode.
29216.0000
190 F
28368.0001
3
00656.0000
180 F
29215 011906