User Notices - Bunn CWT 15-APS Installation & Operating Manual

Carefully read and follow all notices in this manual and on the equipment. All labels on the equipment should
be kept in good condition. Replace any unreadable or damaged labels.
This equipment must be installed to comply
with the International Plumbing Code o the
International Code Council and the Food
Code Manual o the Food and Drug Adminis-
tration (FDA). For models installed outside
the U.S.A., comply with the applicable
Plumbing /Sanitation Code.
#00656.0000
#03408.0002
#03409.0002
Optional Field Wiring
120/208-240 V, 11.4-13.1 A, 2340-3100 W
1PH, 3-Wire + GND, 60HZ
#34955.0000
APS MODELS
Optional Field Wiring
120/208-240 V, 13.0-14.8 A, 2540-3300 W
1PH, 3-Wire + GND, 60HZ
#34955.0002
TWO WARMER BREWERS
#12364.0000

USER NOTICES

#00658.0000
To reduce the risk o electric shock,
do not remove or open cover.
No user-serviceable parts inside.
Authorized service personnel only.
Disconnect power be ore servicing.
#37881.0000
Page 4
! WARNING
Fill water tank before turning - on -
thermostat or connecting appliance
to power source.
Use only on a properly protected
circuit capable of the rated load.
Electrically ground the chassis.
Follow national/local electrical codes.
Do not use near combustibles.
FAILURE TO COMPLY RISKS EQUIPMENT
DAMAGE, FIRE, OR SHOCK HAZARD
READ THE ENTIRE OPERATING MANUAL
BEFORE BUYING OR USING THIS PRODUCT
THIS APPLIANCE IS HEATED WHENEVER
CONNECTED TO A POWER SOURCE
00831 0000F 3/98 ©1998 BUNN O MATIC CORPORATION
#00831.0000
CAUTION
WA R M E R S A N D S U R FAC E S A R E H OT
#02765.0000
Optional Field Wiring
120/208-240 V, 12.25-13.9 A, 2440-3200 W
1PH, 3-Wire + GND, 60HZ
#34955.0001
ONE WARMER MODELS
Optional Field Wiring
120/208-240 V, 13.9-15.6 A, 2640-3400 W
1PH, 3-Wire + GND, 60HZ
#34955.0003
THREE WARMER BREWERS
120V
120/208-240V
#34056.0000
VOLTAGE SELECTOR SWITCH
41721 111308