Daihan Scientific ThermoStable OF-50 User Manual page 19

DAIHAN-Sci.com or ALL for LAB.com Shopping Mall
The scope of the compensative value is -20.0℃ ~ +20.0 , and it is possible to adjust at
-
0.1℃ unit.
After setting the compensation value, the indication of the current temperature is displayed
-
as the temperature including the compensation value.
When entering into the compensation value setting mode during the Heating operation, the
-
Heating operation that is operating is stopped. After setting the compensation value, the
Heating operation is re-conducted in the Set Heating Mode.
If the PUSH button of Jog Dial Knob is pressed and held for 2-3 seconds, the setting value
-
is saved and this saved value is maintained even when the power is turned on again.
If pressing Mode button, it is switched to the Set Heating Mode.
-
③ MAIN - Safety Locking
If pressing MAIN button in the Set Temperature Mode, it is switched to the Locking mode.
-
Present Temp
Remain Time
In the Locking Mode, the Turning by the Jog-Dial Knob or Push button do not applied, and
-
LCD Display and LED lamp indicate the status that is currently operating.
If pressing once the MAIN button, it is entered into the Set Operation Time Mode.
-
* Automatic Operation Function
In the use of the product, if the power supply has been interrupted and then is reapplied, it has
the function that protects the experimental results and samples by automatically reactivating as
the setting of final operation.
In Jog-Dial operation method, support this function by activating the setting temperature stored
through the saving method of the set points.
When reapplying the power supply according to the problem on safety or user's intention, if you
want to disable the automatic operation function, set up the temperature to zero (0) according
to the instruction of Jog-Dial.
DAIHAN Scientific, Forced Convection type Oven
Temp PV :
Time PV : 00:00
< Fig 3.3.5. Safety Locking >
℃
27 ℃
19/48