Daihan Scientific ThermoStable OF-50 User Manual page 18

DAIHAN-Sci.com or ALL for LAB.com Shopping Mall
② MAIN - Set Temperature
If pressing once the MAIN button in the Set Operation Time Mode, it is switched to the
-
temperature setting mode.
Set Temp
Present Temp
The setting temperature is entered by turning the Jog-Dial Knob to clockwise or counter-
-
clockwise. If the setting value is entered to above 0 , the operation standby state is
displayed while blinking the HEATING indication of LCD Display.
The HEATING indication of LCD Display is always displayed during the operation of
-
HEATING, and if the setting value is entered to above 0
is stopped, the HEATING indication indicates the standby status while blinking in long
interval.
The range of the setting temperature is adjustable in the unit of 1℃, and can be set up to
-
230℃.
You can change or save the setting by using the operation method of the Jog-Dial, and
-
Start/Stop of operation can be performed.
*Set offset value
- Temperature compensation is the function that can add or reduce the constant value by
setting the compensation value in the case that user must experiment by matching the
thermometer which he/she is using as the experimental standard and the thermometer
indicated in this regulator.
Present Temp
Offset value
If pressing the SUB button in the Set Temperature mode, it is switched to the Set
-
Temperature Offset mode.
DAIHAN Scientific, Forced Convection type Oven
Temp SV :
Temp PV :
< Fig 3.3.3. Set Temperature Mode>
Temp PV
offset
< Fig 3.3.4. Set offset value Mode>
60 ℃
27 ℃
℃
℃
: 27.0 ℃
: 0.0 ℃
Heating LED (Red)
in the condition that the heating
Heating LED (Red)
18/48