Usage Instructions - Daihan Scientific ThermoStable OF-50 User Manual

DAIHAN-Sci.com or ALL for LAB.com Shopping Mall
3. Product Usage

3.3 Usage Instructions

Before operation, Set the SAFETY knob to 30~40°C higher than operation temperature.
-
Connect the power cord to the proper power socket and Turn on the Main Switch.
-
* Operation method for Jog-Dial
Jog-Dial can be manipulated for the setting in each mode by Turning and Push motion.
-
If turning the Jog-Dial knob to clockwise or counter-clockwise, the setting values can be
-
adjusted, and if briefly pressing once the PUSH button, the Start or the Stop operation is
performed.
The Turning of the Jog-Dial knob does not manipulated during operating, and if resetting
-
the set value, it can be adjusted by the Jog-Dial knob after stopping the product by pressing
briefly once the PUSH button.
If pressing for 2 or 3 seconds the PUSH button, the set value is saved, and even if the
-
power is turned on again, that value is maintained. (If "0" value is saved, the setting value
is initialized.)
① MAIN - Set Operation Time
When the power is turned ON, the initial screen is the setting mode of the Timer set mode.
-
Set Time
Remain Time
< Fig 3.3.1. Set Operation Time Mode>
TIMER LED is lighted during the operation of timer, and indicates that it is operating.
-
The range of setting time is from 00:00 to 99hr and 59min(it is possible to adjust at 1min.)
-
and 00:00 indicates continuous operation.
If the timer operation is completed, the alarm will sound and heating will be stopped.
-
The timer setting mode can be operated by referring to the jog-shuttle operation method.
-
DAIHAN Scientific, Forced Convection type Oven
Time SV : 00:00
Time PV : 00:00
Timer LED (Green)
16/48