Table of Contents
Advertisement
Quick Links
Approximate time to complete installation is 1-1/2" hours for two people
Recommended tools required for installing the Crop Catcher:
-9/16" socket
-7/16" socket
-Hammer
-Center Punch
-Ratchet
-11/32" Drill Bit
Industries, Ltd.
P.O. Box 119
St. Gregor, Saskatchewan
S0K 3X0 Canada
Ph#(306)366-2184 or Fax#(306)366-2145
-Extension
-#2 Phillips Screw Driver
-3/8" Drill
-Large Flat Screw Driver
Mar/01/2020
Advertisement
Table of Contents
Related Manuals for Michel's CROP CATCHER 3
Summary of Contents for Michel's CROP CATCHER 3
- Page 1 Mar/01/2020 Approximate time to complete installation is 1-1/2” hours for two people Recommended tools required for installing the Crop Catcher: -9/16” socket -7/16” socket -Ratchet -Extension -#2 Phillips Screw Driver -Hammer -Center Punch -11/32” Drill Bit -3/8” Drill -Large Flat Screw Driver Industries, Ltd.
- Page 2 Mar/01/2020 Unpack and check that all of the parts are with your Crop Catcher: Item Part No. Description 0011-000701L Crop Catcher III Left Panel 0011-000702 Crop Catcher III Middle Panel 0011-000701R Crop Catcher III Right End Panel 0011-000507R Mounting Bracket - Right 0011-000507L Mounting Bracket - Left 0011-000504...
- Page 3 Mar/01/2020 Glass Forming Procedure: The panels that are supplied with your Crop Catcher have grooves cut into them where they need to be formed. These grooves need to be on the inside of the glass when they are formed. See Pictures. The panels can be formed with your hands.
- Page 4 Mar/01/2020 STEP 4 Binder Post Screw Install the Binder posts into the top of the Panel and the Top Support Inside Bracket. Use a #2 Phillip Screw Driver and a Large Flat Screw ¼” Lock Washer Driver to tighten. Insert the Binder Post from the top side and insert the Barrel Nut and Lock Washer from the bottom.
Need help?
Do you have a question about the CROP CATCHER 3 and is the answer not in the manual?
Questions and answers