1. Manuals
  2. Brands
  3. Michel's Manuals
  4. Farm Equipment
  5. Crop Catcher II
  6. Instruction manual

Michel's Crop Catcher II Instruction Manual

Hide thumbs
1
2
3
4
5
Table of Contents

Advertisement

Quick Links

Download this manual
Approximate time to complete installation is 1-1/2" hours for two people

Recommended tools required for installing the Crop Catcher:

-9/16" socket
-7/16" socket
-Hammer
-Center Punch
-Ratchet
-11/32" Drill Bit
Industries, Ltd.
P.O. Box 119
St. Gregor, Saskatchewan
S0K 3X0 Canada
Patent Pending
-Extension
-#2 Phillips Screw Driver
-3/8" Drill
-Large Flat Screw Driver
May/19/2017
Aug/03/2017
Sep/05/2017
Aug/29/2018
July/16/ 2020

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Crop Catcher II and is the answer not in the manual?

Questions and answers

Related Manuals for Michel's Crop Catcher II

Summary of Contents for Michel's Crop Catcher II

  • Page 1 May/19/2017 Aug/03/2017 Sep/05/2017 Aug/29/2018 July/16/ 2020 Patent Pending Approximate time to complete installation is 1-1/2” hours for two people Recommended tools required for installing the Crop Catcher: -9/16” socket -7/16” socket -Ratchet -Extension -#2 Phillips Screw Driver -Hammer -Center Punch -11/32”...
  • Page 2 May/19/2017 Aug/03/2017 Sep/05/2017 Aug/29/2018 July/16/ 2020 Ph#(306)366-2184 or Fax#(306)366-2145 Unpack and check that all of the parts are with your Crop Catcher: Item Part No. Description 0011-000501L Polycarbonate sheet (1/8) 2 Bend End Panel 0011-000502 Polycarbonate sheet (1/8) 2 Bend Middle Panel 0011-000501R Polycarbonate sheet (1/8) 2 Bend End Panel 0011-000507R...
  • Page 3 May/19/2017 Aug/03/2017 Sep/05/2017 Aug/29/2018 July/16/ 2020 Glass Forming Procedure: The glass that is supplied with your Crop Catcher has grooves cut into it where they need to formed. These grooves need to be on the inside of the glass after they are formed.
  • Page 4 May/19/2017 Aug/03/2017 Sep/05/2017 Aug/29/2018 July/16/ 2020 STEP 4 Binder Post Install the Binder posts into the top of the polycarbonate sheet and the Screw Inside Support Bracket. Use a #2 Phillip Screw Driver and a Large Flat Screw Driver to tighten. Insert the screw from the top side and insert the barrel nut and lock washer from the bottom.
  • Page 5 May/19/2017 Aug/03/2017 Sep/05/2017 Aug/29/2018 July/16/ 2020 S0K 3X0 Canada Ph#(306)366-2184 or Fax#(306)366-2145...

Table of Contents