Important Safety Instructions; Emc/Emi & Certificate Of Conformity - G-Lab GSC-2 User Manual

Important safety instructions

– Read these instructions and follow them.
– Prevent this device against moisture or spilling liquid inside.
– Clean only with dry cloth.
– Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
producing a lot of heat
– Protect the power supply cord from being walked on or pinched.
– Only use attachments/accessories specified by the manufacturer.
– Unplug this device during lighting storms or when unused for long periods of time.
– Do no open device or its power supply casing.
– The power supply adapter should be installed in the socket outlet and disconnection of the adapter
should be easily accessible.
– To completely disconnect from AC mains disconnect the power supply adapter from the AC
receptacle.
EMC/EMI & Certificate of conformity
EMC/EMI
This device has been designed and manufactured to conform with directives and standards in the field of
safety operations and electromagnetic interference.
This device uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However in spite of performing
below standards there is no guarantee that interference will not occur in a particular installation. If this
device does cause harmful interference to radio or television reception which can be determined by turning
the device on and off, the user is encouraged to try to correct the interference by one or more of the
following operations:
– Reorient or relocate the receiving antenna.
– Increase the separation between the device and receiver.
– Connect the device into an outlet on a circuit different from that to which the receiver is connected.
– Contact with the manufacturer (see: Before calling a service).
– Consult the dealer for help.
Certificate of Conformity
ELZAB S.A., ul. Kruczkowskiego 39, 41-813 Zabrze, Poland,
hereby declares on own responsibility that the following product:
that is covered by this certificate and marked with CE 07 label conforms with following standards:
PN-EN 60065:2004
PN-EN 55103-1:1998
PN-EN 55103-2:1998
With reference to regulations in following directives:
73/23/EEC, 2004/108/EEC
GSC-3, GSC-2 – Guitar System Controller
Safety requirements for mains operated electronic and related
apparatus for household and similar general use
Product family standard for audio, video, audio-visual and
entertainment lighting control apparatus for professional use.
Part 1: Emission.
Product family standard for audio, video, audio-visual and
entertainment lighting control apparatus for professional use.
Part 2: Immunity.
Issued in Zabrze, March 2009
Jerzy Biernat
President of the ELZAB S.A. Board of Directors
2