Brother HL-1800 Series User Manual page 144

T r o u b l e s
T r o u b l e s
First, make sure that you are using paper that meets our recommended paper
specifications. See "What Kind of Paper Can I Use?" in Chapter 1.
Problem
The printer does not load
paper.
The printer does not load
paper from the Multi-purpose
Tray.
The printer does not load
envelopes.
There is a paper jam.
The printer does not print to
the Face Down Output Tray.
The printed pages are curled,
so the Face Down Output Tray
cannot hold the prescribed
number of pages.
The printer does not print on
the paper you have chosen.
h o o t i n g
h o o t i n g
Recommendation
•
If there is paper in the paper cassette, make sure it is straight. If
the paper is curled, you should straighten it before printing.
Sometimes it is helpful to remove the paper, turn the stack over
and place it back in the paper cassette.
•
Reduce the amount of paper in the paper cassette, and then try
again.
•
Make sure that the MANUAL FEED = ON (STOP) is not selected
on the control panel.
•
Fan the paper, and then put the paper back in firmly.
•
Make sure that the MANUAL FEED
on the control panel.
•
The printer can load envelopes from the Multi-purpose Tray. Your
application software must be set up correctly to print on the
envelope size you are using. This is usually done in the page
setup or document setup menu of your software. Please see your
software application manual.
•
Clear the jammed paper (see "Paper Jams and How to Clear
Them" in this
•
Close the Face Up Output Tray.
•
Turn the paper in the Paper Cassette over.
•
Change the printer driver setting in Media Type to Transparencies
from the current setting.
•
Make sure that the cable is connected to the printer
•
Make sure that you have chosen the appropriate printer driver.
P a p e r H
P a p e r H
chapter).
6-5
CHAPTER 6 TROUBLESHOOTING
a n d l i n g
a n d l i n g
=
ON (STOP) is not selected