Printing On Labels And Transparencies - Brother HL-1800 Series User Manual

P r i n t i n g o
P r i n t i n g o
• Do not use damaged, curled, wrinkled, or irregularly shaped paper.
• Do not use labels without a mount.
• We recommend that you use labels and transparencies that are made for
laser printers.
• Use labels and transparencies that can withstand intense heat; the
interior of the printer reaches very high temperatures while printing.
✒ ✒ ✒ ✒ Note
•
Before using paper with holes, such as organizer sheets, you must fan
the stack of paper well to avoid paper jams and misfeeds.
•
Do not place the punched holes of organizer sheets near the actuator
(paper sensor).
•
Do not use organizer sheets that are stuck together. The glue on them
might cause damage to the printer.
•
Do not load different types of paper at the same time in the paper
cassette because this may cause paper jams or misfeeds.
•
For correct printing, you must select the same paper size from within
your software application as the paper in the tray.
•
If your application software does not support paper size selection in its
Print menu, you can change the paper size by using the paper menu on
the printer control panel.
n L a b e l s a
n L a b e l s a
n d T r a n s p
n d T r a n s p
Fig. 1-22
For more information, see Chapter 3.
1-27
CHAPTER 1 ABOUT THIS PRINTER
a r e n c i e s
a r e n c i e s