Advertisement
2
C onnect Your Computer and
Turn on the Projector
1
C onnect the USB cable from the interactive module
to any available USB port on your computer.
2
C onnect another cable (USB, HDMI, or VGA cable)
from the projector to your computer.
3
T urn on the projector by pressing the red
button on the remote control.
4
D isplay an image from your computer. If the image
doesn't appear, try one of the following:
•
O n some PC laptops, you may need to hold
down the Fn key on the keyboard and press F7
or the function key that lets you display on an
external monitor. It may have an icon such as
, or it may be labelled CRT/LCD.
•
O n a Mac, you may need to open System
Preferences and select Displays. Select the
VGA Display or Color LCD option if necessary,
then click the Arrange or Arrangement tab,
and select the Mirror Displays check box.
•
T ry pressing the Source Search button on the
remote control.
USB cable
power
Using the Remote
Control
Turn projector
on/off
Access menu
system for
additional
adjustments
Page through
documents
Temporarily
turn off image
For more information about using the remote control and
cool time-saving buttons:
•
S ee the BrightLink User's Guide on your computer or
on the CD in this Welcome Kit.
•
G o to the training section and watch a video or two at
epson.com/brightlink (U.S.), epson.ca/brightlink
(Canada), or atomiclearning.com.
Note: For BrightLink Solo™, the remote control for your
projector will be different.
Select from various
image sources
connected to the
projector
Enter
Zoom in and out
Stop video action
Advertisement
