Temperature And Moisture - Maytag M1TXEGMYW User Instructions

PROBLEM POSSIBLE CAUSES
Temperature is too The refrigerator has just been installed
warm
Cooling is turned off
The controls are not set correctly for
the surrounding conditions
The door(s) are opened often or not
closed completely
A large load of food was recently
added
Temperature is too
The refrigerator air vent(s) are blocked
cold in the refrigerator/
crisper
The controls are not set correctly for
the surrounding conditions
The ice storage bin is not in the correct
position (on some models)
Temperature is too The control is not set correctly for the
cold in the pantry items stored in drawer
drawers (on some
models)
There is interior The room is humid
moisture buildup
The door(s) are opened often or not
NOTE: Some moisture
closed completely
buildup is normal.
The door is blocked open
A bin or shelf is in the way
Storing liquid in open containers
There is frost/ice The doors are opened often or left
buildup in the freezer open
compartment
Poor door seal
Temperature controls are not set
correctly

Temperature and Moisture

SOLUTIONS
Allow 24 hours following installation for the refrigerator to cool
completely.
Turn cooling on. See "Using the Controls."
Adjust the controls a setting colder. Check the temperature in 24
hours. See "Using the Control(s)."
Allows warm air to enter refrigerator. Minimize door openings and
keep doors fully closed.
Allow several hours for refrigerator to return to normal
temperature.
If the air vent located in the top, left, rear corner of the refrigerator
compartment is blocked by items placed directly in front of it, the
refrigerator will get too cold. Move items away from the air vent.
Adjust the controls a setting warmer. Check the temperature in 24
hours. See "Using the Control(s)."
Make sure the ice storage bin is positioned so that it is not
blocking airflow.
Adjust the control setting. See "Refrigerator Features."
A humid environment contributes to moisture buildup.
Allows humid air to enter the refrigerator. Minimize door openings
and close doors completely.
Move food packages away from door.
Push bin or shelf back into the correct position.
This adds humidity to the refrigerator interior. Keep all containers
tightly covered.
Minimize door openings and keep doors fully closed.
Ensure door seals are making full contact with the refrigerator
cabinet to allow for an adequate seal.
See "Using the Controls" for recommended temperature settings.
19