Zanussi ZOP37902XK User Manual page 51

Problem
The display shows "C3".
The display shows "F102".
The display shows an error code
that is not in this table.
The appliance is activated and
does not heat up. The fan does
not operate. The display shows
"Demo".
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
www.zanussi.com
Possible cause
The cleaning function does not
operate. You did not fully close
the door, or the door lock is de-
fective.
• You did not fully close the
door.
• The door lock is defective.
There is an electrical fault.
The demo mode is activated.
We recommend that you write the data here:
Fully close the door.
• Fully close the door.
• Deactivate the oven with the
house fuse or the safety
switch in the fuse box and ac-
tivate it again.
• If the display shows "F102"
again, contact the Customer
Care Department.
• Deactivate the oven with the
house fuse or the safety
switch in the fuse box and ac-
tivate it again.
• If the display shows the error
code again, contact the Cus-
tomer Care Department.
1. Deactivate the oven.
2. Press and hold the button
3. The first digit on the display
4. Enter the code 2468 by
5. The next digit starts to blink.
6. Demo mode deactivates
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove
the rating plate from the appliance cavity.
.........................................
.........................................
.........................................
Remedy
.
and Demo indicator start to
blink.
pressing the buttons
to change the values and
press to confirm.
when you confirm the last
digit and the code is correct.
or
51