Daintree GE current Lumination RC Series Installation Manual page 4

Lumination RC/LRC/RXLRX Series
®
8 Place PSU box onto frame next to unused
junction box and secure with U-bracket by
tightening wing nut.
Place PSU box onto frame next to unused
10
junction box and secure with U-bracket by
tightening wing nut.
Cut cable tie on light fixture
12
9 Take the provided safety tether and loop one
end of the tether around the L-bracket.
11 Plug together the light fixture to the driver
enclosure with the supplied quick connects and
assemble the connector housing once finished.
Align the fixture so that two of the three springs are on each
13
side of the L-bracket. This is necessary in order to make
sure that when the springs release, the L-bracket does not
interfere and prevent the springs from making contact with
the top of the ceiling for proper support.
4
Installation Guide