Daintree GE current Lumination RC Series Installation Manual page 3

Lumination RC/LRC/RXLRX Series
®
RC/LRC-Series Mounting
(RX-Series skip to step 15. LRXR and LRXG - Series, skip to step 18.
Open RC/LRC PSU box cover, disconnect AC conduit. Remove AC conduit wire from PSU box knockout hole using
6
flat head screwdriver.
7 Insert AC line wires into the PSU box through
the knockout hole and connect wires (see
wiring diagrams to the right)
For additional information, refer to RC-series or LRC-series Installation Guides
3
Installation Guide