TeeJet MATRIX 908 Manual

Thank You for Purchasing the
Main Menu button
 a ccesswizards,consoleoptions,mapping&guidancespecifications
and GNSS settings
Information &
Status Bar
Navigation
Activity (center)
& Selectable Job
Information
Interactive Map
pinch / push to zoom
Mini-map
with quick access between
Vehicle View and Field View
TwinView
display both guidance
and UT information
Feature Bar
On Screen Guidance Bar
Vehicle Touch
Application Mapping
to start / stop mapping
Guidance Boundary Display
Mode Mode Quick Adjust
GNSS Status
Straight AB and Azimuth Guidance
Dynamic AB Guidance
Circle Pivot Guidance
Once the power up sequence has completed, the Welcome screen
will appear with the options to select a different language,
switch console units and change the local time zone.
On the Settings Menu, select the "Device" menu
ESTABLISH AN AB GUIDELINE
From Slide-Out Tray
At start location, press Start Guideline
At end location, press Finish Guideline
touch vehicle
From Slide-Out Tray
Mapping Universal
Layers Terminal
Status Information
Outside / Inside Arable Land Area
Assisted/Auto Steering Status
Automatic Section Control
Application Mapping
Action Bar
options for
Guidance or
Boundary selection
Guidance
WELCOME
Mode
Press OK to advance to the Vehicle Wizard.
to establish an Application Mapping device.
Select Guidance Mode on Feature Bar.
, select a guidance mode .
on the Action Bar.
on the Action Bar.
Enter new unique guideline name.
SWITCH GUIDELINE
Boundary
Select Guidance Mode on Feature Bar.
Mode
, select Switch Guideline .
Select from the listed guidelines.
Close Job
Slide-Out Tray button
access options for Feature Bar selection

Guidance Mode

No
Guidance
Straight AB
Guidance
Dynamic AB
Guidance
Circle Pivot
Guidance
Azimuth
Guidance
Boundary Mode
External
Internal
Start
Guideline
Finish
Guideline
Cancel
Guideline
Dynamic AB
Detour
Start
Azimuth
Adjust
Guideline
Nudge
Guideline
Start
External
Finish
External
Start
Internal
Finish
Internal