7042-Cr7 Hardware Management Console Specifications - IBM 8202-E4B Manual

7042-CR7 Hardware Management Console specifications

Hardware specifications provide detailed information about your Hardware Management Console
(HMC), including dimensions, electrical, environmental requirements, and noise emissions.
The HMC controls managed systems, including the management of logical partitions and the use of
capacity on demand (CoD). By using service applications, the HMC communicates with managed
systems to detect, consolidate, and send information to IBM for analysis. The HMC provides service
technicians with diagnostic information for systems that can operate in a multiple-partitioned
environment.
Use the following specifications to plan for your HMC.
Table 123. Dimensions
Width
429 mm (16.9 in.)
Table 124. Electrical requirements
Electrical characteristics
Maximum measured power
Maximum thermal output
Input voltage low range
Input voltage high range
Frequency (Hertz)
Table 125. Environmental requirements
Environment
Recommended operating temperature 10°C - 35°C (50°F - 95°F)
Nonoperating temperature
Shipping temperature
Maximum altitude
Operating humidity
Operating dew point (maximum)
Nonoperating humidity
Nonoperating dew point (maximum)
Table 126. Noise emissions (Maximum configuration)
Acoustical characteristics
L
WAd
1. These levels were measured in controlled acoustical environments according to the procedures specified by the
American National Standards Institute (ANSI) S12.10 and ISO 7779 and are reported in accordance with ISO
9296. Actual sound-pressure levels in a specific location might exceed the average values stated because of room
reflections and other nearby noise sources. The declared sound-power levels indicate an upper limit, below
which a large number of computers will operate.
Depth
734 mm (28.9 in.)
System requirements
10°C - 32°C (50°F - 90°F)
10°C - 28°C (50°F - 83°F)
5°C - 45°C (41°F - 113°F)
-40°C to 60°C (-40°F to 140°F)
3048 m (10,000 ft)
20% - 80%
21°C (70°F)
8% - 80%
27°C (81°F)
1
Idling
6.2 bels
Height
43 mm (1.7 in.)
Properties
351 W
1198 Btu/hr
100 - 127 V ac
200 - 240 V ac
50 or 60 Hz (+/- 3 Hz)
Altitude
0 - 915 m (0 - 3000 ft)
915 - 2134 m (3000 - 7000 ft)
2134 - 3050 m (7000 - 10,000 ft)
Operating
6.5 bels
Weight (maximum
configuration)
16.4 kg (36.16 lb)
Hardware specification sheets
69