Specifications - Bryston C Series B-60 SST Brochure & Specs

B100 SST C-SERIES
PREAMPLIFIER
FREqUENCY RESPONSE
20Hz - 20kHz +/- .05dB
MAxIMUM OUTPUT
15 volts
IM OR THD
Less than 0.005% at 3 volts out
HIGH LEvEL SENSITIvITY
500mV
RATED NOISE
Ref. 500mV
20-20kHz - 100dB
FEATURES
4 stereo RCA inputs
3 with DAC option
1 stereo RCA output
1 stereo tape loop
Headphone output
Gold plated switch
contacts and connectors
Optional remote, volume and mute
Optional MM phono stage
Optional DAC

SpECIFICATIONS

AMPLIFIER
WATTS
100 watts per channel, 8 ohms
180 watts per channel, 4 ohms
HARMONIC DISTORTION
Less than 0.02% from
20Hz to 20kHz at 60 watts
IM DISTORTION
Less than 0.01% from
10 milliwatts to 60 watts
NOISE
106dB below full output
SLEWING RATE
Greater than 60 volts per microsecond
POWER BANDWIDTH
.5Hz to over 100kHz
DAMPING FACTOR
Over 500 at 20Hz, ref. 8 ohms
INPUT SENSITIvITY
.775 Volt in for full output 50k input impedance
FEATURES
Independent analog and digital power supplies
Will deliver full output to any phase angle at 4 ohms or higher.
Pre-out/main-in connectors
DIMENSIONS
19 or 17 x 4.5 x 10.5 inches, 48.26 or 43.18 x 11.43 x 26.67 cm
wt: 19 lbs, 8.5 kg
FINISH
Available in 17 or 19 inch C-Series faceplates in Silver
or Black
8