Frequency Response - Bryston C Series B-60 SST Brochure & Specs

MM/MC PHONO STAGE
BP-1.5 MC PHONO SPECIFICATIONS:
Distortion: Less than .005%, 20-20kHz, with preamplifier
driven to full rated output
Noise: Equivalent to approximately 1000 ohm metal film
resistor (Thermal noise greater than 85dB below 0.6mV
input, unweighted)
Gain: 16.5 or 22.5dB (internally restrappable)
Frequency Response: Below 5Hz to above 30kHz, within
less than +/- 0.5dB
MM PHONO STAGE
bp 1.5 MM/MC

FREqUENCY RESPONSE

(With Inverse RIAA filter) 20Hz-20kHz +1-.05dB
MAxIMUM OUTPUT
MC mode; Between 20Hz to 20KHz less than +/- 0.5 dB.
MM mode; Between 20Hz to 20KHz less than +/- 0.1dB
RATED OUTPUT
5 Volts RMS High Level sensitivity MM mode; 5 mV
MC mode; 500uV
DISTORTION
< .005% IM or THD, any frequency or combination of
frequencies from 20Hz-20kHz at rated output
(with A Weighting filter)
RATED NOISE
MM mode; -80 dBA referred to an input of 5 mV RMS
@ 1kHz MC mode; -80 dBA referred to an input of 0.5
GAIN
MM mode; 35 dB or 41 dB (internally changeable).
Factory set gain; 35dB MC mode; 51.5 dB , 57.5 dB or
63.5 dB (internally changeable). Factory set gain; 57.5 dB
RIAA ACCURACY
Within less than +/- 0.05dB from 20-20kHz inclusive
FEATURES
• 1 pair Power supply input and outputs
• 1 pair RCA inputs and outputs
A/C POWER CONSUMPTION
& HEAT LOAD
1. Operating Current 13.8W
2. Max. Wattage 14W
WEIGHT
BP 1.5, 5 lbs (2.27 kg) MPS2, 20 lbs (9 kg)
FINISH
Available in 17 or 19 inch C-Series faceplates in
Silver or Black
I2
BRYSToN