Harmonic Distortion; Damping Factor; Input Sensitivity - Bryston C Series B-60 SST Brochure & Specs

B-60 SST
PREAMPLIFIER
FREqUENCY RESPONSE
20Hz - 20kHz +/- .05dB
MAxIMUM OUTPUT
15 volts
IM OR THD
Less than 0.005% at 3 volts out
HIGH LEvEL SENSITIvITY
500mV
RATED NOISE
Ref. 500mV
20-20kHz - 100dB
FEATURES
4 stereo RCA inputs
3 with DAC option
1 stereo RCA output
1 stereo tape loop
Headphone output
Gold plated switch
contacts and connectors
Optional remote, volume and mute
Optional MM phono stage
Optional DAC
C-SERIES SpECIFICATIONS
AMPLIFIER
WATTS
60 watts per channel, 8 ohms
100 watts per channel, 4 ohms

HARMONIC DISTORTION

Less than 0.01% from
20Hz to 20kHz at 60 watts
IM DISTORTION
Less than 0.01% from
10 milliwatts to 60 watts
NOISE
106dB below full output
SLEWING RATE
Greater than 60 volts per microsecond
POWER BANDWIDTH
.5Hz to over 100kHz

DAMPING FACTOR

Over 500 at 20Hz, ref. 8 ohms

INPUT SENSITIvITY

.775 Volt in for full output 50k input impedance
FEATURES
Each channel employs completely independent power supply
Will deliver full output to any phase angle at 4 ohms or higher
Pre-out/main-in connectors
DIMENSIONS
19 or 17 x 2.25 x 10.5 inches, 48.26 or 43.18 x 5.72 x 26.67 cm
wt: 19 lbs, 8.5 kg
FINISH
Available in 17 or 19 inch C-Series faceplates in
Silver or Black
I0