Connection - Tripp Lite BP192V12RT3US Owner's Manual

Connection

Connecting a Battery Pack to the UPS
The battery pack includes a detached, 3-conductor DC cable. Two conductors contain a polarized plug at each end for a DC
power connection from the battery pack to the UPS. The third conductor is for ground connection between the battery pack
and the UPS.
UPS models without Power Distribution
Module: To connect the battery pack cable to the
UPS, first remove the DC connector plate cover
. Then, connect the battery cable's ground wire to
the UPS system's battery pack ground screw
location and connect to the ground connection
2
on the battery pack. Plug in the polarized DC
connector to the UPS, followed by the battery
pack's incoming DC connector
UPS models with Power Distribution Module:
For UPS systems with the power distribution
module (PDM), connect the battery cable ground
wire to the ground screw connection located on
the underside of the PDM. Connect and secure
the other end of ground wire to the ground
connection on the battery pack.
Always connect the ground first.
Note: The incoming DC connector is always located on
top and the outgoing DC connector is always located on
the bottom.
Daisy-Chaining Multiple Battery Packs
For longer runtime, one or more BP192V12RT3US battery packs may be used with daisy-chain capability.
To daisy-chain multiple battery packs to a single
UPS, first connect the battery pack to the UPS
(refer to Connecting a Battery Pack to the
UPS). Using a second cable harness, connect to
the first battery pack unit's outgoing ground
and plug the cable harness into the first battery
pack's outgoing DC connector
the second battery pack's incoming ground
plug the cable harness into the second battery
pack's incoming DC connector
procedure for each additional battery pack.
Always connect the ground first.
Notes:
• Only one battery pack will have a direct connection to
the UPS.
• Multiple battery pack configurations will provide longer
runtimes, but will also require longer recharge times.
1
.
3
,
1
. Then connect to
2
and
3
. Repeat
4
3
3
1
2
1
4
3
8
1
2
2