Printer Led Indications - Brother HL 2170W Quick Setup Manual

Getting Started

Printer LED Indications

3
: Blinking
Printer LED
Toner
Drum
Error
Ready
(Blue)
Printer LED
Toner
(Yellow)
Drum
(Yellow)
Error
(Red)
Ready
(Blue)
User's Guide
1
The LED will blink in a pattern of ON for 1 second and then OFF for 1 second.
2
The LED will blink in a pattern of ON for 0.5 seconds and then OFF for 0.5 seconds.
3
The yellow LED will blink in a pattern of ON for 2 seconds and then OFF for 3 seconds.
LED indications when using the one-push wireless setting mode
Printer
LED accessing the access
Toner
(Yellow)
Drum
(Yellow)
Error
(Red)
Ready
(Blue)
1
The LED will blink (turn on for 0.2 seconds and off for 0.1 second).
2
The LED will turn on for 5 minutes.
3
The LED will blink (turn on for 0.1 second and off for 0.1 second) for 30 seconds.
4
The LED will flash 10 times and then turn OFF for half a second. This pattern will repeat 20 times.
8
: ON
OFF Sleep
Dimmed
3 Toner life
Toner low
end
Chapter 5 Chapter 5
Searching or Connecting and
downloading settings
1
point from the access point
: OFF
Warming up Ready
1
Cooling down
Drum near Cover open
3 2
end of life Paper jam
Chapter 5 Chapter 6
Connection
succeeded
1
Receiving
2
data
No paper 2
Drum Error
Chapter 6 Chapter 4
Connection Session overlap is
2 3
failed detected
Print Data
2
remaining
Service
2
call
Chapter 4
4