Teknika MUL-20 Operation Manual
  1. Manuals
  2. Brands
  3. Teknika Manuals
  4. Tools
  5. MUL-20
  6. Operation manual

Teknika MUL-20 Operation Manual

Sealles combination tool for steel strapping
Hide thumbs
1
2
3
4
5
6

Advertisement

Table of Contents

MUL-20
Sealless Combination Tool
for Steel Strapping
01
02
03
07
08
10
11
12
14
15
16
17
18
19
20
04
05
06
58
53
21
61
41
42
43
44
65
43
39
For Parts & Service 1-877-862-6699
25
23
64
67
59
19
20
61
15
47
48
49
50
62
60
5/8" , 3/4"
50; 47; 23
(16 , 19 mm)
60, 62, 64 1/2" , 5/8"
(13 , 16 mm)
26
27
28
68
03
01
38
39
54
22
40
66
32
31
51
52
53
55
30
33
34
35
36
37
05

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MUL-20 and is the answer not in the manual?

Questions and answers

Related Manuals for Teknika MUL-20

Summary of Contents for Teknika MUL-20

  • Page 1 MUL-20 Sealless Combination Tool for Steel Strapping 5/8" , 3/4" 50; 47; 23 (16 , 19 mm) 60, 62, 64 1/2" , 5/8" (13 , 16 mm) For Parts & Service 1-877-862-6699...
  • Page 2 MUL-20 PARTS LIST Sealless Combination Tool for Steel Strapping KEY No PART DESCRIPTION 20-01 RATCHET WHEEL 20-02 TENSION PAWL 20-03 PAWL SPRING 20-04 TENSION HANDLE 20-05 KNOB 20-06 E-RING EXTERNAL SERIES 7/32" 20-07 HEAVY DUTY EXTERNAL RETAINING RING 16 20-08...
  • Page 3 MUL-20 Sealless Combination Tool for STEEL Operation Manual Strap Type Regular Duty/High Tensile Steel Strap Width Adjustable 1/2", 5/8", 3/4" (13, 16, 19 mm) Strap Thickness Up to 0.025" (0.64 mm) Joint Type Sealless Weight 9.1 lbs (4.1 kg) Footprint L: 4.5";...
  • Page 4 Fig. 1 – Starting Position 1. Pull up on Feed Wheel Support Handle 68 to raise Feed Wheel 38. Load both straps 100 and 101 under Dies 19, under Cutter Blade 41 and under Feed Wheel 38 and release the Feed Wheel Support Handle 68 as shown on Fig.
  • Page 5 2. Apply tension by ratcheting Tension Handle 04 as shown on Fig. 3. Fig. 3 3. Once satisfactory tension is achieved return Tension Handle 04 back and push Sealing Handle 66 forward to seal the joint and cut the excess strap as shown on Fig.4 Fig.
  • Page 6 Front and Rear Guides around and replace the screws. Make sure that the same stamped numbers are exposed on each The MUL-20 is adjusted from the factory so that there is Guide: “13” for 1/2" strap, “16” for 5/8" strap, and “19” for 3/4"...

Table of Contents