Package Contents - gefran DIGISTAR II Installation And Operation Manual

Gefran S.p.A. All Rights Reserved
This publication is the exclusive property of GEFRAN spa.
The information contained in this document is private and confidential, no part of this document may be repro-
duced, photocopied, transmitted, written, translated into other languages, using computer systems or any other
electronic, mechanical, optical, chemical, manual or other means, without the specific written agreement of Gefran
S.p.A
IMPORTANT
Even though all of the information contained in this document has been carefully checked, Gefran S.p.A. has no
responsibility with regards to the presence of mistakes or damages to people or things due to an incorrect use of
this manual, the same goes for the people or companies involved in the creation or production of this manual.
Furthermore, Gefran S.p.A. reserves the right to bring about changes to the contents and to the appearance of
this document, as well as to product specifications, at any time and without any warning.
Gefran S.p.A. does not provide any guarantee of any kind related to this material, including but not limited to, the
specific warranties of saleability and suitability for a specific objective.
Gefran S.p.A. declines any responsibility related to the use of its software on equipment not provided by Gefran
S.p.A.
PREFACE
The objective of this document is to provide a detailed description of the main technical characteristics of the har-
dware and firmware of the Gefran product called DIGISTAR II and GF-BOX.
Information necessary for a correct use of the products to which the manual refers follows. Such information is
related to the pinout of connectors with relative signals, setup of bridges and connections with external devices.
The majority of the hardware options can be configured by software through the set up data stored in the Eeprom,
therefore there are very few pure hardware options, which simplifies remarkably the configuration of the module
itself.

Package contents

GEFRAN provides the following standard products with DIGISTAR II, DIGISTAR II Control and GF-BOX:
• E.M.I. suppressor with ferrite core
• Power supply connector
• Panel fastening kit
• Instruction manual
2
80544B_MHW_DIGISTAR II - DIGISTAR II Control - GF-BOX_02-2013_ENG