SEWING BUTTONHOLES AND BUTTONS
Sewing Buttons
Stitch
Stitch
Name Pattern
Length
[mm (inch)]
Zigzag
F
Stitch
(1/64)
1
Measure the distance between the
buttonholes and set the pattern selection dial
to the Zigzag Stitch, and set the width you
want.
2
Remove the power supply plug from the
outlet.
3
Change the foot to the button sewing foot.
4
Place the darning plate on the needle plate.
5
Connect the power supply plug into the wall
outlet.
6
Put a button between the foot and the fabric
and make sure that the needle enters the holes
without hitting the button. If it hits, see step
1
.
36
——————————————————————————————————————
Stitch
Width
Foot
Other
[mm (inch)]
Button
Darning
Any
Sewing
Plate
Foot
7
At a slow speed, sew about 10 stitches.
8
Remove the material from the machine. Cut
the upper and lower threads and tie both
threads at the back of the material.
CAUTION
●
Make sure the needle does not hit the
button during sewing. The needle may
break and you may be injured.