Brother NX-200 Operation Manual page 40

GETTING READY ———————————————————————————————————————————————————
4 Turn the screw at the bottom of the legs to
adjust their height.
CAUTION
●
Do not move the sewing machine while
the wide table is attached, otherwise
damage or injuries may occur.
5 When you are finished using the wide table,
remove it.
While slightly lifting up the wide table, pull it
off to the left.
6 Install the flat bed attachment back in its
original position.
Memo
● With the legs folded up, the wide table can
be stored attached to the hard case.
34